Hydraulic Hoisting Winches TMV - TME
TMA designs and manufactures customized winches to fully meet each individual application requirements.
Hydraulic hoisting winches have drum, gearbox, motor and valve specifically selected, based on the TMV and TME winch ranges. The result is a winch providing the best performance and reliability.
TMV winches are driven by an axial piston motor, whilst TME winches have an orbit motor. Both ranges have the brake outside drum, to simplify maintenance. Both of the ranges are available in marine version, with stainless steel rope tensioner and marine surface treatment.
A wide range of accessories is available to complete the products: wire rope, pulley block, hook, tension roller, lower limit switch, load limiting system, spooling device, emergency lowering, MOPS, AOPS, constant tension.
VERSIONS
- Grooved Drum
- Special Grooved Drum
- Special Length Drum
- ATEX (Ex II 2G Ex h IIC T4 Gb)
- ATEX (Ex II 3G Ex h IIA T3 Gc)
- Class Approved
- Surface Marine Treatment
- Surface Flame Metallizing
- Tension Roller in Stainless Steel
ACCESSORIES
- Wire Rope
- Pulley Block
- Hook
- Tension Roller
- Lower Limit Switch
- Spooling Device
- Load Limiting System
- Load Detection System
- Emergency Lowering
- MOPS
- AOPS
- Constant Tension
CATALOGUE
VIDEO
|
Winch Model |
Line pull 1st Layer |
Working Pressure |
Max Line Speed |
Oil Flow |
Drum Diameter |
Cable Diameter |
Drum Capacity |
| kg | bar | m/min | l/min | mm | mm | m | |
| TMV - 1 | 4500 | 270 | 54 | 100 | 298 | 15 | 83 |
| TMV - 2 | 5500 | 280 | 57 | 120 | 322 | 16 | 99 |
| TMV - 3 | 6500 | 275 | 47 | 120 | 366 | 18 | 104 |
| TMV - 4 | 8500 | 285 | 55 | 180 | 405 | 20 | 108 |
| TMV - 5 | 9500 | 285 | 49 | 180 | 418 | 22 | 118 |
| TMV - 6 | 13500 | 285 | 42 | 220 | 455 | 24 | 121 |
| TMV - 7 | 17000 | 275 | 38 | 250 | 505 | 26 | 139 |
| TMV - 8 | 19000 | 280 | 30 | 250 | 555 | 30 | 110 |
| TMV - 9 | 24000 | 260 | 36 | 400 | 608 | 36 | 142 |
|
Winch Model |
Line pull 1st Layer |
Working Pressure |
Max Line Speed |
Oil Flow |
Drum Diameter |
Cable Diameter |
Drum Capacity |
| kg | bar | m/min | l/min | mm | mm | m | |
| TME - 1 | 4500 | 195 | 47 | 120 | 298 | 15 | 83 |
| TME - 2 | 5000 | 200 | 43 | 120 | 322 | 16 | 99 |
| TME - 3 | 6000 | 200 | 31 | 120 | 366 | 18 | 104 |
| TME - 4 | 7000 | 200 | 32 | 120 | 405 | 20 | 108 |
| TME - 5 | 8500 | 195 | 25 | 120 | 418 | 22 | 118 |
| TME - 6 | 11000 | 175 | 16 | 120 | 455 | 24 | 121 |
